BNPRD - 600 INDUSTRIAL ENAMEL 11105
- MSDS: BNPRD
- Manufacturer: DAVLIN PAINT CO INC
- Product Name: 600 INDUSTRIAL ENAMEL 11105
- National Stock Number: 8010-00-616-7486
Product Identification
Product ID:600 INDUSTRIAL ENAMEL 11105
MSDS Date:02/25/1991
FSC:8010
NIIN:00-616-7486
MSDS Number: BNPRD
Responsible Party
BERKELEY, CA 94702
US
Emergency Phone: 510-848-2863
Info Phone: 510-848-2863
Preparer: PATRICIA SHAW
Cage: 3Z268
Contractor
Telephone: 510-848-2863
Cage: 3Z268
Ingredients
HYDROCARBON MIXTURE (VAPOR PRESSURE 2.0 MM HG @ 68 F)
CAS: 64741-41-9
Fraction By Weight: 30%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: NASAL, RESP IRRIT. EYE: SEVERE
IRRIT. SKIN: PROLONG/REPEAT: MOD IRRIT, DEFATTING, DERMATITIS.
INGEST: DIGEST TRACT IRRIT, CENTRL NERV SYS DEPRESS. ASPIRATION
HZD. MAT'L CAN ENTER LUNGS DURING S WALLOW/VOMIT--CAUSE LUNG
INFLAMMATION. CHRONIC: RESPIR SYS, LUNGS, EYE, SKIN, GI TRACT,
LIVER, SPLEEN, KIDNEY DAMAGE.
Effects of Overexposure:INHAL: DIZZINESS, WEAKNESS, FATIGUE, NAUSEA AND
HEADACHE. HIGH CONCENTRATIONS MAY RESULT IN NARCOSIS (CENTRAL
NERVOUS SYSTEM DEPRESSION). EYE: TEARING, REDNESS, AND BLURRED
VISION.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMATITIS, AND NAUSEA.
First Aid
First Aid:EYE: FLUSH W/WATER 15 MIN, LIFTING EYELID. GET MED AID. SKIN:
REMOVE CONTAM CLOTHING, WASH W/SOAP & WATER. IF IRRIT PERSISTS, SEE
DR. INHAL: REMOVE TO FRESH AIR. APPLY ARTIF RESPIRATION OR ADMIN
OXYGE N IF NEEDED. SEE DR. INGEST: GIVE WATER/MILK TO DRINK &
TELEPHONE FOR MED ADVICE. DO NOT INDUCE VOMITING UNLESS DIRECTED TO
BY MED PERSONNEL. IF MED ADVICE UNAVAILABLE, TAKE TO NEAREST EMERG
HOSPITAL.
Fire Fighting
Flash Point Method:SCC
Flash Point:104F,40C
Lower Limits:1.0
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE EXTINGUISHERS (NFPA FLAMM LIQ). WATER MAY
BE INEFFECTIVE BUT MAY BE USED AS FOG FOR COOLING. FIRE FIGHTERS
SHOULD WEAR FULL PROTECT CLOTH & BREATHING APP.
Unusual Fire/Explosion Hazard:VAPOR FORM EXPLOSIVE MIX W/AIR (LEL TO
UEL), CAN BE IGNITED BY MANY SOURCES. CLOSED CNTNRS MAY EXPLODE
W/HEAT. ISOLATE FROM HEAT/IGNITION SOURCES.
Accidental Release
Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL IGNITION SOURCES. VENTILATE THE AREA. PROVIDE APPROPRIATE
PROTECTIVE EQUIPMENT. DIKE AROUND THE SPILL AREA. COVER SPILL WITH
INERT ABSORBENT AND TRANSF ER USING NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:STORE BELOW 80F IN CLOSED CONTAINER.
STORE IN ORIGINAL CONTAINER. AVOID FLAME & HIGH TEMPERATURES. DO
NOT STORE NEAR OXIDIZING AGENTS OR ACIDS.
Other Precautions:VAPOR IS HEAVIER THAN AIR, MAY TRAVEL DISTANCE TO
IGNIT SOURCE & FLASHBACK. DON'T INGEST. AVOID INHAL OF HEATED
VAPOR/SPRAY MIST. KEEP FROM HEAT. GROUND CONNECTIONS, CONTAINERS
WHEN POURING TO MINIMIZ E STATIC ELEC. USE NON-SPARKING TOOLS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA EQUIP WHEN AIRBORN EXPOSURE
EXCEEDS TLV. CONSULT RESPIRATOR MFR TO DETERMINE EQUIPMENT FOR
GIVEN APPLICATION. HIGH AIRBORN CONCENTRATIONS MAY REQUIRE USE OF
SUPPLIED-AIR RESPIRATOR OR S ELF-CONTAINED BREATHING APPARATUS.
Ventilation:PROVIDE SUFFICIENT VENT TO CONTROL EXPOSURE LEVELS BELOW
TLV/PEL. VENTILATION EQUIPMENT MUST BE EXPLOSION PROOF.
Protective Gloves:PROTECTIVE GLOVES (SEE MFR FOR TYPE)
Eye Protection:CHEMICAL SAFETY GLASSES, GOGGLES
Other Protective Equipment:WEAR IMPERMEABLE APRONS & PROTECT CLOTH WHEN
POSSIBLE TO PREVENT SKIN CONTACT. HEAD CAP WHEN POSSIBLE STRONGLY
RECOMMEND
Work Hygienic Practices:AFTER USING, WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Density:> AIR
Spec Gravity:1.1 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT WATER SOLUBLE
Appearance and Odor:PIGMENTED LIQUID. SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HEAT OR IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE AND/OR MONOXIDE, LOW MOLECULAR WEIGHT HYDROCARBONS AND
ORGANIC ACIDS.
Disposal
Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS, AND WATERWAYS.
DISPOSE OF PRODUCT IN ACCORDANCE WITH FEDERAL, STATE & LOCAL
REGULATIONS. IGNITABLE D001.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.